In the dry mix mortar manufacturing process, it is essential to put materials in the correct order. Putting materials into the weighing hopper according to the dry mortar formula can make your dry powder composition more accurate and the quality of dry powder mortar higher. Let’s see how to correctly put materials in the línea de producción de mortero seco.

1. Add light materials first, como el cemento, calcio pesado, Ceniza voladora, etc.. The advantage of this is that the mixer has a small starting resistance.

2. Then add a small number of additive materials, como polvo de caucho, celulosa, materiales de polipropileno, etc.. Después de revolver por un rato, añadir aditivos con muy pocos ingredientes, que se puede mezclar completamente sin desperdiciar materiales y mejorar la eficiencia de dispersión.

3. Por fin, añadir materiales como arena. Lo sabías? Si se agrega arena primero, la corriente de arranque aumentará aproximadamente 4 veces. En el inicio de la fabricación de morteros de mezcla seca, alguien agregó la arena requerida para un lote de materiales en el mezclador de una sola vez, lo que haría que la máquina se asfixiara directamente, the mixer would not start usually, and the mixer would be damaged. The most crucial point is that pure sand wears a lot to the iron plate. Por fin, adding sand, the light material, will form a buffering effect on the mixer, significantly reducing the wear and tear.

4. The mixing time is related to the mixing ratio. Por ejemplo, a 1:1000 y 1:10000, the mixing time is different. If the proportion of various additives in the formula is relatively high, you can consider increasing the pre-mixed bin or prolonging the mixing time.

1. To meet the formula requirements to the greatest extent, the composition of dry mortar is more accurate.

2. Reasonable feeding sequence helps the mixer meet the mixing requirements the shortest time.

3. Reasonable feeding sequence will help reduce the wear and tear of materials on the mixer and prolong the service life of the dry mix mortar production line.

After reading this article, do you already know “how to correctly put materials in the dry mortar production line”?

Put various additives first, start the equipment and then put sand. Hope this article is helpful to you. Si quieres saber más, Por favor póngase en contacto con nosotros.