El proceso de fabricación de una mezcladora de mortero de cinta generalmente implica los siguientes pasos:
1. Corte y Fabricación:
Las palas de la batidora suelen estar hechas de acero inoxidable y se cortan y se les da la forma deseada..
2. Soldadura:
The blades are attached to a central shaft using welding. The welding process involves heating the metal to a high temperature and then fusing the metals.
3. Housing:
The ribbon mortar mixer housing is typically made of carbon steel or stainless steel and is often fabricated by cutting and welding.
4. Assembly:
The blades are fitted into the ribbon mortar mixer housing and welded into place. The shaft is then attached to a drive motor, and the mixer is assembled.
5. Testing:
The ribbon mortar mixer is tested to ensure it functions properly and meets the required specifications.
The welding steps involved in manufacturing a ribbon mortar mixer depend on the design and construction of the mixer. En general, the blades are welded onto the central shaft using a MIG or TIG welding process. The welds are inspected to ensure they are solid and defects-free. The mixer housing is also welded together using a similar approach. In some cases, additional welds may be added to reinforce critical areas of the ribbon mortar mixer.