Raymond Grinding Mill
The feed size of Raymond grinding mill: 15-30มม.
กำลังการผลิต: 0.3-10 ไทย.
วัสดุที่ใช้ได้: โดโลไมต์, หินปูน, potassium feldspar, แบไรท์, แคลไซต์, talc, หินอ่อน, ฯลฯ.
The finished particle size of the raymond grinding mill can be adjusted freely within the range of 80-325 ตาข่าย, and some materials can reach 2000 ตาข่าย.
What Is A Raymond Grinding Mill?
Raymond grinding mill is a general-purpose grinding mill, can process a variety of non-metallic ore and a variety of hardness below 9.3 วัสดุ, and grind these materials into powder, the particle size of the finished product can be up to 0.045mm.
The raymond mill grinds small pieces of material such as limestone, โดโลไมต์, หินแกรนิต, bauxite into powder products, and then applies them to roads, วัสดุก่อสร้าง, and other places where they are needed. The application is very extensive.
Raymond Mill Working Principle
How does a raymond grinding mill work?
อันดับแรก, after the large block material is crushed to the required size by the jaw crusher, the material is sent to the storage bin by the belt conveyor, and then the material is uniformly and continuously fed into the mill by the vibrating feeder, and the material is sent to the mill by the vibrating feeder.
The powder will be carried away by the airflow of the fan if it is fully ground inside. After sieving by the analyzer, the powder that meets the requirements will enter the cyclone collection box along with the airflow for separation and collection, and the unqualified powder will be sent to the raymond grinding mill again for grinding until it becomes a qualified product.
Because the material being ground sometimes has certain water content, heat will be generated during grinding, which will cause the gas in the mill to evaporate and thus change the airflow.
The gas is introduced into the small cyclone collection box, and the excess fine powder is collected, and discharged into the atmosphere through the exhaust pipe of the small cyclone collector, or introduced into the dust collector. That is to increase the output, but also protect the environment.
Details of Raymond Grinding Mill
Raymond mill application: หินปูน, แคลไซต์, แคลเซียมคาร์บอเนต, โดโลไมต์, แบไรท์, talc, ยิปซั่ม, diabase, หินควอตซ์, เบนโทไนท์, ฯลฯ.
Raymond grinding mills are widely used in the grinding of metallurgy, วัสดุก่อสร้าง, สารเคมี, เหมืองแร่, and other mineral materials, suitable for processing various non-flammable and explosive ores with hardness less than 7 and humidity below 6%.
Raymond grinding mill, also known as raymond mill, is a kind of grinding ma, using the advanced technology and structure of similar products at home and abroad, ประสิทธิภาพสูง, low power consumption, รอยเท้าเล็กๆ, small one-time investment.
The roller is pressed tightly on the ring under the action of centrifugal force, so when the roller and ring are worn, the output and fineness of the finished product will not be affected, and the replacement cycle of the roller and ring is long.
Advantage of Raymond Grinding Mill
Parameters of Raymond Grinding Mill
We mainly produce suspension roll Type Raymond mill, the main models are 6R4525, 5R4119, 4R3216, 3R75 Raymond grinding mill, และอื่นๆ.
FUREIN Raymond grinding mill air selection is in the fan —— grinding shell —— cyclone separator —— fan circulation flow operation, so less dust, clean operation workshop, no pollution environment.
Parameter of Raymond Mill | 4525 | 4119 |
---|---|---|
ขนาดฟีดของวัสดุ (มม) | ≤30 | ≤25 |
Finished Size of Material (มม) | 0.173-0.044 | 0.173-0.044 |
Capacity per 8 ชั่วโมง (ที) | 16-176 | 8-78 |
Center Shaft Speed (rpm) | 82 | 105 |
Ring Diameter (มม) | 1770 | 1400 |
Roller Diameter (มม) | 450 | 410 |
ความสูงของลูกกลิ้ง (มม) | 250 | 190 |
Main Motor (กิโลวัตต์) | 132 | 75 |
Fan Motor (กิโลวัตต์) | 132 | 75 |
Analyzer Motor (กิโลวัตต์) | 18.5 | 7.5 |
Raymond Grinding Mill Production Line
สายการผลิตโรงบดผงดินขาว
วัสดุ: ดินขาว
ความจุ: 2-120ไทย
การกำหนดค่า: บดกราม, เรย์มอนด์ มิลล์, ลิฟท์ถัง, เครื่องป้อนแรงสั่นสะเทือนแม่เหล็กไฟฟ้า, เครื่องแยกผงและตัวเก็บฝุ่น, ฯลฯ.