Tile adhesive mixing ratio

The main components of tile adhesive are cement, cát và nước. The ratio for making tile adhesive cement is usually 1:1:2. To make it easier to work with, you can use an adhesive mixing machine to mix that's easy to spread onto your tiles.

Tỷ lệ trộn keo dán gạch và nước khoảng bột: nước =4:1;

Đổ nước vào thùng chứa, Sau đó đổ từ từ vữa keo dán gạch vào nước, trộn hoàn toàn cho đến khi không còn vón cục, dán thống nhất, nếu bùn đại diện cho 2-3 phút rồi khuấy lại hiệu quả sẽ tốt hơn;

Dùng dao cạo có răng phết hỗn hợp keo dán gạch lên tường, mỗi lần về 1 Kilôgam, rồi dán gạch lên tường;

Nếu tìm thấy rãnh mặt sau của gạch men sâu hơn, đừng quên bôi keo lên mặt sau của gạch men.

Lưu ý về keo dán gạch ceramic:

Keo dán gạch men thích hợp sử dụng trong môi trường 5oC ~ 40oC; Nhớ trộn với nước.

Độ thẳng đứng và độ phẳng của vật liệu đáy phải được xác nhận trước khi thi công, và tác dụng của việc đứng cho 24 vài giờ sau khi đẻ thì tốt hơn.

Nếu nhiệt độ bề mặt đế cao hơn 40oC, bề mặt đế phải được làm ướt bằng nước trước để tránh mất nước quá nhiều cho keo.

Đường nối giữa các viên gạch có thể sử dụng keo dán gạch men thích hợp.

Trước khi chất rắn chưa khô hoàn toàn có thể dùng miếng bọt biển ướt hoặc khăn rửa chén để lau nhẹ bề mặt gạch men.

The main functions of tile adhesive include:

• Dễ dàng sử dụng: It can be applied directly on the surface of ceramic tiles with a brush or roller after diluting with water according to the specified proportion;
• High bonding strength: Sau khi sấy khô, it can achieve a strong bond between two surfaces;
• Excellent waterproof performance: It can effectively prevent liquids from penetrating through;
• Good ageing resistance: The aged products still have good adhesion after ageing for 30 days at 40℃;

Tile adhesive formulation

Tile adhesive is made of natural rubber latex or synthetic rubber latex and various additives such as accelerator, retarder and curing agent etc., which are mixed together according to different formulas by kneading machines. The finished product looks white or greyish white with some impurities in it.

Tile adhesives are formulated with a mixture of resins, polyme, chất độn, thickeners and water. The resin content of the tile adhesive determines the degree of flexibility and elasticity of the adhesive. Adhesives with higher resin content tend to be less flexible than those with lower resin content. Ceramic tile manufacturers use various types of resins based on the type of tiles being installed, as well as on environmental conditions such as temperature and humidity in which they will be used.

How to Make Tile Adhesive?

Tile adhesive is often used for fixing tiles on the floor and wall. It is a kind of mortar with good adhesion and is easy to apply. You can make your tile adhesive at home, but it is difficult to control the quality or get the right proportion of materials.

Most people prefer to buy ready-made tile glue from stores if you make tile adhesive in small batches. Add a certain amount of water and stir evenly according to your formula.

How to make tile adhesive in large quantities?

If you want to sell tile adhesive mortar, we need a set of equipment; it is best to automate tile adhesive production. This is a tile adhesive making machine, or you can call it a nhà máy sản xuất keo dán gạch.
1. Prepare the required raw materials; it is best to store them in the warehouse, such as cement and put them in the silo xi măng.
2. Use the băng tải trục vít or elevator to transport the raw material to the weighing system.
3. The weighing system will weigh according to the set ratio and put it into the mixer.
4. After the mixer mixes evenly, it is transported to the finished product warehouse.
5. Use a fully automatic packaging machine to pack the mixed tile adhesive into bags.
6. Tile adhesives in bags can be used directly by adding water.