Wall Putty Making Machine: The Ultimate FAQ Guide
Yes, it’s the same machine. It’s just called something different.
How about the wall putty manufacturing process?
Below is a flow chart of the wall putty making machine, we can see from the figure, from 2 of your putty powder formula import feed port, through the screw conveyor to ribbon putty mixing machine.
After 3 to 5 minutes mixing, push discharging button, then automatic discharging, through screw conveyor to the finished product bin.
The finished mortar waiting for the packing, in the end, by the automatic packaging machine packaging into bags.
How about a wall putty machine price?
To a certain extent, the price is determined by your budget. Of course, the more the budget, the higher the degree of automation and the higher the production efficiency. Contact us for a free quote now.
My budget is limited, how can I buy a wall putty making machine with the largest output at the minimum cost?
That’s a good question. As a wall putty making machine manufacturer, we are good at customizing all kinds of solutions. Please don’t hesitate to contact us now and tell us your requirements and budget.
The following suggested wall putty making machine is the most cost-effective, but its output can reach 6t/h.
What kind of packing machine should we choose for a wall putty making machine?
If your material is small particles, such as mortar, putty powder, you can use the impeller type automatic valve port packaging machine, its weighing range is 10kg ~ 50kg, only need manually insert the bags, it can achieve automatic bag back, if your output is large, you can add a belt machine behind, to achieve automatic palletization packaging system.
If your material is poor fluidity of the material, such as sand, you can use the airflow of the automatic valve port packaging machine, the output of the impeller valve port packaging machine, can also automatically back the bag, packaging speed is fast, improve production efficiency.
Is the automatic valve port packing machine equipped with a pneumatic device?
Of course, an air source is essential. According to the customer’s wall putty making machine capacity and the number of valve port packing machines, air compressors are prepared for you, with 0.6m³ and 0.9m³. You do not have to worry about it.
Does the wall putty making machine have a control system?
Yes, the wall putty making machine also has a power control cabinet, which can realize automatic feeding, automatic mixing, automatic unloading, and automatic packaging.
It is also called the simple line because the entire wall putty manufacturing process is manually fed, and the additives need to be weighed manually before being put into the putty mixer.
How to choose the dust removal system?
We have 2 types of dust collectors. One is an economical bag dust remover. This is generally used on small dry mix mortar plants. The other is the high-efficiency pulse dust remover, which can collect 99.5% of dust with large air volume and long service life. You can choose the best one according to your needs.
In the material lifting, should we use a screw conveyor or bucket elevator?
If your output requirements are not large, such as 8t/h, we recommend that you use a screw conveyor, because it can help you save costs more under the same output.
If your output requirement is more than 8t/h, we recommend that you use a bucket elevator, because it can better help you increase your output.
If you don’t know the choice of plate chain elevator or belt elevator, please leave a message and we will serve you one to one.
Contact us to get a factory price right now!