Do You Have A Dry Mortar Production Line Project We Can Help With?

Dry mortar production line can be used in the production of cement-based mortar, stone-based mortar, masonry mortar, bonding mortar, plaster mortar, special mortar, self-leveling, tile adhesive, wall putty, etc.

Capacity: 1-8t/h.

This small production line also can produce many dry mortars, and it has many advantages, such as small occupation, less investment, quick effect, simple operation, and so on.

Capacity: 10-15t/h.

After about 5 minutes of mixing, the uniformity of the material can reach more than 99.5%, and the water content of the material can decide if need the sand drying plant.

Capacity: more than 30t/h.

Widely application, small investment, small footprint, dry mix mortar production line adopts fully automatic computer control, intelligent metering, and simple operation.

Semi-automatic dry mix mortar production line output is 1-10t/h, can be said to be small output, big return, very suitable for small and medium-sized investors.

Here we list three best-selling dry mix mortar plants. The larger the mixer, the higher the output.

Dry mix mortar production line with an annual capacity of 200,000 tons, you can choose whether to increase crushing and drying equipment according to your needs.

This is a fully automatic dry mortar mixing machine, which uses PLC computer control, high automation, and anytime, anywhere, while increasing efficiency, ensuring the smoothness of personnel communication.

Let's have a look at the parts of this production line?

1. Storage system:

Dry-mixed mortar machine for storage of cement, sand, fly ash, etc., we usually call it "cement silo", which can be pumped to the cement silo by an air pump, without increasing bucket elevator.

Of course, you can also choose to use a bucket elevator to transport materials into the cement silo.

The top dust removal device of the cement silo absorbs the dust and protects the working environment. The cone portion of the cement silo is equipped with a pneumatic device, which can effectively prevent cement, and fly ash so that the material keeps smoothly.

2. Drying system:

This sand drying plant is used to dry sand, and this sand drying line contains a hot-blast stove, sand dryer, screening machine, dust collector, conveyor, etc. Three-pass rotary dryer can make full use of heat sources, and quickly dry the sand.

3. Batching system:

This dry-mixing mortar machine is automatically completed. It is accumulated weighing. If there are three materials such as sand, cement, and additives, ie weighing systems to set the ratio of each material in advance, first complete the weighing of the sand, then complete the weighing of the cement, and finally the weighing of the additive. The accuracy of weighing is as high as 99.5%, ensuring the quality of the dry powder mortar.

4. Double-shaft dry mortar mixer:

The non-gravity dry mortar mixer is one of the highlights of the entire production line. It can be mixed quickly, with no dead angle, high efficiency, and fast equipment. The materials can be mixed evenly for around 2 minutes per batch.

5. Packaging system:

The finished product can be packed in bags or in bulk according to your need. Now the palletizer is very popular and can help you improve efficiency.

6. Dust removal system:

The dust removal system is generally installed at the discharge port of the packing machine, which can effectively collect dust and keep the air clean. The pulse dust collector has high dust removal efficiency and long service life.

7. Control system:

Using a computer, PLC control, an intuitive operation, it can be arbitrarily adjusted, accurate control, error automatic correction.